Achievements

    • RTE (France) : modelling of over 130 km of 225 kV power lines in PLS-CADD, computation of the clearances to ground and obstacles on these lines and drawing of the profiles plans.
    • ALPIQ (Switzerland) : study of a pylon on a 220 kV power line.
    • RTE-CNER (France) : validation of the 14.40 version of the PLS-CADD, PLS-POLE and TOWER softwares.
    • RTE-CNER (France) : mechanical and geometrical studies, using finite elements models, of short-circuits impact on spans inside the substations of Tavel (400 kV), Porcheville (90 kV), Herblay (63 kV), Saint-Victor (225 kV), Montereau (63 kV), Lannemezan (63 kV), Gonneville (90 kV) and Argentière (63 kV).
    • RTE-CNER (France) : serie of studies of a new concept of fiber poles with line-post insulators intended to limit the landscape impact of 90 kV power lines.
    • RTE (France) : studey of the transformation of a classical overhead line pylon into a overhead-underground interface pylon.
    • RTE-CNER (France) : serie of studies about the non-linear behaviour of conductors and the creep phenomenom.
  • RTE-CNER (France) :  Development of a Power Line software PLS-CADD/TOWER/PLS-POLE updates validation methodology
  • RTE-CNER (France) : validation of the Power Line software version 12.3 PLS-CADD, TOWER and PLS-POLE
  • RTE-CNER (France) : Development of both a methodology and a study in order to define the damage caused by the explosion of an industrial site on 7 power lines
  • ELIA : transposition of the TOWER software into Belgian norms
  • NEXANS : comparison between two new generation electrical conductors (Losag and ACSR) for a pilot project for Finland
  • FABRICOM : mechanics study of the metallic floor of the Bevercée power plant high voltage substation
  • FABRICOM : mechanics study of a gantry of the Bevercée power plant high voltage substation
  • ELIA : verification of mechanics calculation note of a fall protection system
  • FABRICOM : mechanics study of a fall protection system
  • ELIA : study of 380kV pylons from the power line Zomergem-Eecklo (Stevin project)
  • EDF-Luminus : MV/70kV outpost of the Thuin wind park : drafting of the technical purchase file
  • ORES : study, drafting of the technical purchase files and monitoring of the realization of the new 6 and 15kV electrical cabins from Antoing
  • ORES : study, drafting of the technical purchase files and monitoring of the realization of the new 10kV electrical cabin  from Petit Rechain
  • ORES : study,  drafting of the technical purchase files and monitoring of the realization of the new 15kV electrical cabin  from Hanzinelle
  • ORES : study,  drafting of the technical purchase files and monitoring of the realization of the new 11kV electrical cabin  from Saint-Mard
  • TRACTEBEL : 400 kV underground lines for coal plants in Germany and Holland (analysis of the offers)
  • RTE-CNER (France) : analysis of the behavior of high temperature power line conductors and historical conductors (see Publications)
  • RTE-CNER (France) : mechanics and geometry studies based on the Finite Element Method of the impact of short-circuit in the  power lines ending at the 400kV high voltage substation from Tavel, Chevalet, Avelin and Mastaing
  • RTE-CNER (France) : parametric study based on Experimental Design method concerning the electrodynamics hypothesis in order to define the study policy on the whole French territory
  • RTE-CNER (France) : calculus of the stability of high voltage towers (63 and 90 kV)
  • RTE-CNER (France) : diagnosis and security of 7 power lines in the North and Pas-de-Calais departments
  • ELIA : study of the impact of mobile aerials on the mechanics holding of 400kV pylons
  • ELIA : dynamics study based on the Finite Element Study of the mechanical loads induced in a span in case of short-circuit
  • ELIA (subcontractor for MONNAIE SA) : management of the framework agreement and realization of studies for mechanics work on high voltage pylons of ELIA network
  • ELIA : audit of power lines : 70kV Ciply-Pâturages and 150 kV Baudour-Chièvres